Oil-based penetrant for concrete
Details
| Advantages |
Specific practices and requirements |
| Good permeability, no fading |
Concrete colorants penetrate deep into the concrete substrate and react with it to form a stable colored concrete structure. They can withstand long-term use of the floor without fading. (Traditional colorants are similar to applying a layer of paint on the floor surface. As time goes by, the floor surface will be slightly worn due to friction, causing the surface coloring layer to fall off. |
| Good weather resistance, UV resistance, no fading |
This product has good weather resistance and can maintain stable performance in different environments and temperature differences in different regions. At the same time, it has strong UV resistance and can be used for floors outdoors and under harsh ultraviolet radiation without fading after long-term use. |
| Rich colors can be adjusted at will |
Concrete-colored floors are rich in colors, with golden yellow, orange, camel, brown, coffee, orange, date red, bright red, sauce red, and purple as the main tones. |
| How to use oil-based penetrant for concrete |
| 1. Dry-grind the concrete to 50# and cure it with concrete sealer and curing agent KS-503A. |
| 2. Dry-grind the concrete to 500#. |
| 3. The concrete must be dry and its surface must be cleaned. |
| 4. Protect the finished product in non-colored areas. |
| 5. One person sprinkles a sufficient amount of colorant on the concrete surface, and the other person follows closely to spread the colorant repeatedly and evenly with a dust pusher until it is completely absorbed by the concrete. |
| 6. If you want to further deepen the color, repeat the coloring 4 hours after the previous colorant is applied and dried to achieve the best coloring effect. |
| 7. Dry naturally for more than 24 hours, and extend the curing appropriately in a low-temperature environment. |
| 8. Use a high-speed polisher with a 2# diamond polishing pad for grinding and polishing. |
| 9. Sprinkle the concrete color fixation hardener KS-503C evenly on the concrete surface and spread it evenly with a dust pusher repeatedly. |
| 10. Keep the floor moist for more than 30 minutes. If the color fixer is completely absorbed by the floor during this period, sprinkle additional color fixer to keep it moist; if the color fixer begins to dry on the concrete surface, sprinkle water to keep the floor moist. |
| 11. After the concrete color fixer is slightly dry, polish it with a high-speed polisher equipped with a 3# diamond polishing pad. |
| 12. If you want to achieve better curing and polishing effects, repeat the color fixation and polishing after the floor is completely dry to achieve the best coloring effect. |
| Features |
Specific features |
| Hardness |
After curing, the Mohs hardness of the floor can be increased. |
| Gloss |
After curing and staining, the floor shows an attractive marble sheen. |
| Sealed and impermeable |
The curing agent plays a sealing role and has an anti-penetration effect. |
| Dust and sandproof |
Forming a sealed whole, can prevent the dust in the concrete from escaping from the gaps and make it easier to take care of. |
| Weathering resistant |
The treated ground has high hardness and significant weathering resistance. |
| Abrasion resistant |
After using the curing agent, the floor is extremely durable and resistant to wear and scratches. |
| Slip resistant |
After curing, the ground can reduce surface resistance and improve slip resistance. |
| Odorless |
No irritating smell |
