Concrete Osmotic Hardener -

Concrete osmotic hardener

Short Description:

KS-514 has extremely strong permeability and can effectively penetrate the concrete surface, react with the concrete continuously, combine with calcium and potassium ions that can reduce the strength of concrete, generate high-strength copolymers that do not expand or shrink and are stable in nature, seal and harden the concrete matrix, and form a dense overall structure, whose strength will continue to increase over time, thereby achieving the effect of hardening, strengthening, weathering resistance, impermeability, wear resistance, chemical resistance, dust-free, dust-solid as steel, and radiant concrete sealing. This product is a highly concentrated water-based liquid, non-toxic, odorless, non-flammable, non-volatile, safe and environmentally friendly.

CONTACT NOW

Details

Product Application

Construction Process

Concrete penetrating hardener KS-514S is used in different ways depending on the ground conditions.

1. If the ground needs to be polished, clean the dust on the ground and spray it once with the original liquid or in different proportions of 1:1, 2, 3. After 12 or 24 hours, it can be polished. If the ground quality is poor, KS-514 can be applied repeatedly.

2. For use without polishing, clean the ground first and repair the potholes. After 24 hours, you can spray KS-514. The dilution ratio depends on the ground and conditions.

Product Technical Performance

Technical performance	Specific parameters
Functional features	Dustproof, anti-corrosion, anti-crack, anti-flaking, anti-weathering, wear-resistant, hardened, impermeable, glazing, moisture-proof, easy to clean, simple and fast construction, simple and convenient maintenance, low cost, strong adhesion, good flexibility, impact resistance, super strong penetration, various colors, bright and bright, good covering power, anti-ultraviolet and non-fading, good decorative effect.
Concrete surface	Cement foundation and mortar surface, coating, and gypsum surface should be free of dust, oil stains, and glue stains; water content should be less than 8%.
Dosage	Generally about 0.1~0.2KG/square, depending on the temperature and the roughness and flatness of the concrete.
Color	Natural color (transparent) and various colors.
Surface state	After coating on the concrete, the surface retains its original condition, does not change the flatness, and only increases the color, brightness, wear resistance, and pressure resistance.
Solvent	Not required.
Primer	Not required.
Usage method	Brush, and roll with a roller or spray. Stir well before use.
Cleaning	Soap and water.
Storage time	It must be stored in a sealed, cool, ventilated, and dry place for more than three years.
Drying time	Surface drying takes 0.5 to 2 hours, and you can walk after it is dry. After about 7 days of actual drying, you can drive or use a forklift.
Tools	Low-pressure nozzle or roller or brush.
Precautions	This product contains oily organic solvents and cannot be mixed with water. During the storage, transportation, and construction of this product, attention must be paid to ventilation and fire prevention measures.

Comparison of Product Performance Indicators

Product performance	Index parameters
Joining force	After applying the penetrant, the cement foundation has strong bonding strength.
Permeability	This product forms a film on the treated sample cement surface and has a penetration performance of 3MM.
Compressive strength	The general cement surface is 40MPA, and the foundation strength after treatment is 80MPA.
Surface hardness	The Mohs hardness of the general sample is 4, and the Mohs hardness after treatment is 8.
Impenetration resistance	In a 5-square-inch treated area, a 0.7-inch tap is used to flush, and the penetration rate is 0.002CC per hour.
Friction coefficient	The friction coefficient of the treated cement test block is 86, while the friction coefficient of the untreated ground is 71.
Weathering resistance	Ultraviolet rays and water spray have no adverse effects on the treated samples. The ground after the sample surface is treated will not be affected by exposure to electromagnetic or water mist.