Details
| How to use |
| 1. The concrete must be dry, and its surface must be cleaned before construction. |
| 2. Protect the finished product in non-protective areas. |
| 3. Mix components A and B in a ratio of 2:1 and stir them evenly. The amount used each time is about 1-2 liters. Do not add too much because this protective agent dries quickly. |
| 4. Apply the antifouling agent evenly on the concrete surface to be protected with a brush or roller. Apply it in a criss-cross manner without missing any. For loose concrete that is often exposed to oil or has a high water absorption rate, it should be applied continuously 2-3 times (the second coat should be applied after the previous coat is slightly dry). |
| 5. Natural curing at room temperature for more than 24 hours (the curing time in a low-temperature environment should be appropriately extended). |
| Product features |
| 1. The pattern and color can be combined arbitrarily, and the overall forming can be completed at one time. |
| 2. The compressive strength can generally reach more than 3 times that of ordinary concrete, and it has good wear resistance. |
| 3. Using inorganic pigments, the color is firm and lasting, and it is resistant to ultraviolet rays. It is suitable for the complex and changeable temperature, humidity, and other climatic conditions in China. |
| 4. Oil-proof, waterproof, and non-slip, the surface will not crack, fall off, or fade. |
