Concrete Color Toughened Floor

Concrete color toughened floor

Short Description:

Concrete-color toughened floors are generally suitable for commercial places such as hotels, restaurants, stations, airport terminals, shopping malls, shopping centers, schools, exhibition halls, specialty stores, etc. Dilebao tempered floor is dustproof, wear-resistant, heavy-load, compression-resistant, easy to clean and maintain, and it also meets the national A-level fire protection standards, effectively blocks the pores on the floor surface, and strengthens and hardens the floor, which plays a role in dustproof, wear-resistant, compression-resistant, heavy-load, oil-resistant, easy to clean and maintain. From grinding – to material application – polishing, Dilebao’s professional construction team uses professional construction technology to help you realize your dream of turning stone into gold.

CONTACT NOW

Details

Product Application

Technical Parameters

Technical parameters

1. The wear resistance is 32.5% higher than that of ordinary concrete, reaching the German diamond hardened ground standard.

2. Water-proof, oil-proof, anti-slip, reducing water loss by 93%.

3. Hardness: After 7 days of hardening, it can be increased by 40%, and the impact resistance is increased by 13.3%.

4. Adhesion: It can increase 17% to epoxy resin.

5. Anti-slip: Anti-slip coefficient. 86 (dry). 69 (wet).

6. Penetration: The penetration is up to 0.022CC/hour. (1.83m water pressure test).

Performance Characteristics

Features	Performance characteristics
Improve strength	The Benaigu Concrete Sealing and Curing Floor can solidify the components of concrete into a hard entity, forming a three-dimensional spatial network structure, thereby increasing the density, strength, and hardness of concrete, and greatly improving the wear resistance and surface weather resistance of concrete. The smooth surface after finishing will produce a beautiful luster like marble. The concrete treated with this product has a strength increase of more than 40% compared with the untreated, fully matured concrete after 30 days of compression test, and the strength continues to increase over time.
Sealing and anti-seepage	The Benaigu Concrete Sealing and Curing Floor can form a three-dimensional spatial network structure in the internal microstructure of concrete, thereby increasing the density of concrete, and is permanently sealed during the life cycle, and is resistant to oil and other dirt.
Maintain concrete	It can inhibit the generation of fine cracks and temperature difference cracks on newly made concrete floors. When used on solid concrete that has been properly poured and just completed, the substances generated by chemical reactions with the concrete components will retain water which is extremely important in the hydration process, and maintain the concrete consistently.
No dusting	The product agent of BENAG reacts chemically with the silicate in the concrete, permanently eliminating the concrete particles released from the surface voids, thereby preventing dusting.
Binding ability	Since the concrete salts that are unfavorable to the surface bonding are eliminated, the treated surface is more conducive to the use of painting, waterproof materials, binders, and floor materials, and is compatible with any type of coating materials.
Green and environmentally friendly	BENAG curing agent is an inorganic product that is diluted with water and does not require the use of organic solvents. VOC meets environmental protection requirements, is non-toxic and odorless, and is green and environmentally friendly.
Save maintenance costs	After the BENAG flooring product is completed, there is no need for waxing or renovation during use. Only clean water mopping is required, which is simple and convenient, and saves a lot of maintenance and maintenance costs.
Oil resistance	The wear-resistant floor itself is not oil-resistant. If you want to achieve good impermeability and oil resistance, you can use BENAG concrete curing agent to make the surface of the wear-resistant floor dense, achieve good impermeability, and improve the wear resistance and gloss of the floor.
Corrosion resistance	Standard salt corrosion test. 42D natural electric current is always positive, stable value +0.5mm (S.C.E), maximum value +120MV (S.C.E) cement specimen, 5% NACI solution immersion, 2 years and 3 months without rust.
Slip resistance	Benaigu tempered flooring greatly improves the performance of concrete floors. Due to the denser structure, the degree of light reflection is greatly enhanced, making the concrete floor produce a gloss similar to a marble mirror and more beautiful. But at the same time, it does not affect its anti-slip performance, and it is even improved compared to ordinary cement floors.

Construction Process

Process	Construction process
Base surface treatment	Use a professional floor scrubber to clean the floor, remove the original ground garbage, dust, and slurry, and expose the clean and fresh surface of the concrete.
Grinding the floor	Clean the floor, grind the iron grinding disc 30.60, and the resin grinding disc 50.150, dry and cool thoroughly, and repair all floor defects before 150.
Spraying materials	Wait for the surface to dry for 12-24 hours before spraying, apply the dye twice, during which one person colors and two people drag the floor continuously to keep the ground absorption consistent, the dosage is about 0.2KG/m²; (a small range of samples is required to determine the construction rhythm).
Grinding the floor	After drying, use 300 mesh to grind off the floating color on the surface, push the dust, and clean it up, and the uneven position needs to be supplemented with color. Before applying the curing material, the color must be consistent.
Spraying materials	After the surface is dried, spray 1-2 coats of sealing curing agent evenly, moisturize for 2 hours, grind 500 mesh with clean water, clean it up, and dry it thoroughly. The dosage is about 0.2 kg/m².
Spraying materials	After spraying the curing agent with a 1:4 dilution, moisturize for 2 hours, vacuum it, and clean it up, the amount is about 0.2KG/m.
Fine polishing	After the surface of the floor is dry, dry polish with 4# dry polishing king grinding disc, dry polish with 5# dry polishing king grinding disc, and clean the floor after completion (do not work with water).
Spraying materials	After the clean surface is dry, spray (fixing color protective agent) with an amount of about 0.02~0.03 KG/m².
High-speed polishing	After the surface of the floor is dry, use a professional high-polishing machine with the corresponding polishing pad for polishing and safe construction.